Vinyl Examination Gloves

JW Distribution Home Page

Order

Products

Contact Us

Get Netscape Communicator 4.04 Now!
Get Microsoft Internet Explorer 4.0

Best viewed in
800x600 in
24-bit color.

  Vinyl Examination Gloves The Alpine Powder-Free Vinyl Examination Glove is unquestionably the preferred non-latex glove used by professionals who require a particle-free environment. The powder-free vinyl glove may be used in a variety of applications including, but not limited to protection against infectious bodily fluids and antimicrobial cross contamination. Our powder-free vinyl gloves are extremely resilient resulting in increased resistance against tear and puncture normally associated with other lesser quality vinyl gloves. In addition to quality construction, the Alpine powder-free vinyl exam glove also represents value and savings when compared to other higher-priced synthetic gloves.

TECHNICAL SPECIFICATIONS
Meets American Society for Testing and Materials
(ASTM) Standards. Consistent Physical Dimensions.
 
 
 
Size Thickness
(mm)
Width
(±10mm)
Length
(mm)
X-Small
Small
Medium
Large
X-Large
0.08*
0.08*
0.08*
0.08*
0.08*
  80
  88
  98
105
112
240**
240**
240**
240**
240**
   *   Minimum Finger and Palm
   ** Minimum for All Sizes

Measurement Before
Aging
After
Accelerated
Aging
 Tensile Strength
  (Mega Pascal)
Ultimate Elongation (%)
10

300

10

280

Packaging: 100 pcs. per box, 10 boxes per case
ORDER #s:
 AVE9100XS
 AVE9100S
 AVE9100M
 AVE9100L
 AVE9100XL
- X-Small
- Small
- Medium
- Large
- X-Large

MANUFACTURED IN COMPLIANCE WITH
GOOD MANUFACTURING PRACTICES (GMP)

· Lot Number control for accountability for each
produced lot.
· Quality assurance programs for all phases of
production to ensure against defects.
· Each step of the manufacturing process is
controlled and validated to the maximum
adherence to quality standards.
· Environmental controls to limit any airborne
contamination.

WATERTIGHT TEST USING 1000ML WATER
Based on ISO 2859, samples selected at random and
inspected against ASTM D 3578-77 with results
within Acceptance Quality Level (AQL) 2.5% or
based upon Federal Register 21CFR 800-20,
MIL-STD 105E, Inspection Level II and AQL 2.5%.

   
W e b   S i t e   C r e a t e d   B y :

Vision Graphics Design: Designing Web Sites of the Future!

    Copyright © 1998 JW Distribution. All rights reserved. Reproduction in whole or in part in any form or in any medium without express permission of JW Distribution is prohibited. JW Distribution and Safety First are trademarks of JW Distribution.