Best viewed in 800x600 in 24-bit color.

Alpine Chlorinated Powder-Free Latex Exam Gloves are manufactured under the highest levels of scrutiny to produce a glove that is unlike any other glove currently available. Our twice-chlorinated powder-free gloves are specially formulated to treat the natural latex from potential allergens, resulting in a friction-free glove without the need for any powdering agents. Only top-quality compounding and processing ingredients are used in the manufacturing process to ensure purity and to reduce the risk of adverse skin reactions and inflammation. In addition to on-line multi-leaching processes that remove water-soluble proteins and residues from the latex film, all of our powder-free latex gloves are then further subjected to our distinctive serial extractions for neutral skin sensitivity. This glove is available in a Smooth or Textured exterior finish depending on your application and preference. TECHNICAL SPECIFICATIONS Meets American Society for Testing and Materials (ASTM) Standards. Consistent Physical Dimensions.       Size Thickness (mm) Width (±10mm) Length (mm) Small Medium Large X-Large 0.08* 0.08* 0.08* 0.08*   88   98 105 112 240** 240** 240** 240**    *   Minimum Finger and Palm    ** Minimum for All Sizes Measurement Before Aging After Accelerated Aging  Tensile Strength   (Mega Pascal) Ultimate Elongation (%) 28 850 23 750 Packaging: 100 pcs. per box, 10 boxes per case ORDER #s:  ALE8100S  ALE8100M  ALE8100L  ALE8100XL - Small - Medium - Large - X-Large MANUFACTURED IN COMPLIANCE WITH GOOD MANUFACTURING PRACTICES (GMP) · Lot Number control for accountability for each produced lot. · Quality assurance programs for all phases of production to ensure against defects. · Each step of the manufacturing process is controlled and validated to the maximum adherence to quality standards. · Environmental controls to limit any airborne contamination. WATERTIGHT TEST USING 1000ML WATER Based on ISO 2859, samples selected at random and inspected against ASTM D 3578-77 with results within Acceptance Quality Level (AQL) 2.5% or based upon Federal Register 21CFR 800-20, MIL-STD 105E, Inspection Level II and AQL 2.5%.

W e b   S i t e   C r e a t e d   B y :

Copyright © 1998 JW Distribution. All rights reserved. Reproduction in whole or in part in any form or in any medium without express permission of JW Distribution is prohibited. JW Distribution and Safety First are trademarks of JW Distribution.