Latex Examination Gloves

JW Distribution Home Page

Order

Products

Contact Us

Get Netscape Communicator 4.04 Now!
Get Microsoft Internet Explorer 4.0

Best viewed in
800x600 in
24-bit color.

  Latex Examination Gloves The Alpine 12" Cuff Chlorinated Powder-Free Latex Exam Glove incorporates our popular finger-textured exterior finish and features an extended cuff for an even greater personal protection. This 12" textured power-free latex glove is ideal for those applications where particle and powder contamination is extremely critical. Studies have shown that glove powder can serve as a medium for the transmission of latex protein to the skin or into the air when donning the gloves which significantly increases the risk of inhalant latex allergy. The finished product is the result of optimally compounded latex resulting in a highly purified natural glove completely free of starches or powders of any kind.

TECHNICAL SPECIFICATIONS
Meets American Society for Testing and Materials
(ASTM) Standards. Consistent Physical Dimensions.
 
 
 
Size Thickness
(mm)
Width
(±10mm)
Length
(mm)
Small
Medium
Large
X-Large
0.08*
0.08*
0.08*
0.08*
  88
  98
105
112
300**
300**
300**
300**
   *   Minimum Finger and Palm
   ** Minimum for All Sizes

Measurement Before
Aging
After
Accelerated
Aging
 Tensile Strength
  (Mega Pascal)
Ultimate Elongation (%)
28

850

23

750

Packaging: 100 pcs. per box, 10 boxes per case
ORDER #s:
 ALE8312S
 ALE8312M
 ALE8312L
 ALE8312XL
- Small
- Medium
- Large
- X-Large

MANUFACTURED IN COMPLIANCE WITH
GOOD MANUFACTURING PRACTICES (GMP)

· Lot Number control for accountability for each
produced lot.
· Quality assurance programs for all phases of
production to ensure against defects.
· Each step of the manufacturing process is
controlled and validated to the maximum
adherence to quality standards.
· Environmental controls to limit any airborne
contamination.

WATERTIGHT TEST USING 1000ML WATER
Based on ISO 2859, samples selected at random and
inspected against ASTM D 3578-77 with results
within Acceptance Quality Level (AQL) 2.5% or
based upon Federal Register 21CFR 800-20,
MIL-STD 105E, Inspection Level II and AQL 2.5%.

   
W e b   S i t e   C r e a t e d   B y :

Vision Graphics Design: Designing Web Sites of the Future!

    Copyright © 1998 JW Distribution. All rights reserved. Reproduction in whole or in part in any form or in any medium without express permission of JW Distribution is prohibited. JW Distribution and Safety First are trademarks of JW Distribution.