Latex Examination Gloves

JW Distribution Home Page

Order

Products

Contact Us

Get Netscape Communicator 4.04 Now!
Get Microsoft Internet Explorer 4.0

Best viewed in
800x600 in
24-bit color.

  Latex Examination Gloves Alpine Chlorine-Free Powder-Free Latex Examination Gloves represent an exciting and innovative alternative to traditional powder-free latex gloves. This Alpine glove features a unique non-chlorine wash process which removes the powdering agents and water-soluble proteins normally associated with adverse skin irritations. This special process treats the interior surface of the glove with a synthetic lining which allows easy donning and comfortable wear. The result is an environmentally safe powder-free latex glove which has a slip-resistant exterior surface for superlative tactile sensitivity which is ideal for dental and laboratory uses and a variety of other applications.

TECHNICAL SPECIFICATIONS
Meets American Society for Testing and Materials
(ASTM) Standards. Consistent Physical Dimensions.
 
 
 
Size Thickness
(mm)
Width
(±10mm)
Length
(mm)
Small
Medium
Large
X-Large
0.08*
0.08*
0.08*
0.08*
  88
  98
105
112
240**
240**
240**
240**
   *   Minimum Finger and Palm
   ** Minimum for All Sizes

Measurement Before
Aging
After
Accelerated
Aging
 Tensile Strength
  (Mega Pascal)
Ultimate Elongation (%)
28

850

23

750

Packaging: 100 pcs. per box, 10 boxes per case
ORDER #s:
Smooth
 ALE8200S
 ALE8200M
 ALE8200L
 ALE8200XL
- Small
- Medium
- Large
- X-Large

ORDER #s:
Textured
 ALE8300S
 ALE8300M
 ALE8300L
 ALE8300XL
- Small
- Medium
- Large
- X-Large

MANUFACTURED IN COMPLIANCE WITH
GOOD MANUFACTURING PRACTICES (GMP)

· Lot Number control for accountability for each
produced lot.
· Quality assurance programs for all phases of
production to ensure against defects.
· Each step of the manufacturing process is
controlled and validated to the maximum
adherence to quality standards.
· Environmental controls to limit any airborne
contamination.

WATERTIGHT TEST USING 1000ML WATER
Based on ISO 2859, samples selected at random and
inspected against ASTM D 3578-77 with results
within Acceptance Quality Level (AQL) 2.5% or
based upon Federal Register 21CFR 800-20,
MIL-STD 105E, Inspection Level II and AQL 2.5%.

   
W e b   S i t e   C r e a t e d   B y :

Vision Graphics Design: Designing Web Sites of the Future!

    Copyright © 1998 JW Distribution. All rights reserved. Reproduction in whole or in part in any form or in any medium without express permission of JW Distribution is prohibited. JW Distribution and Safety First are trademarks of JW Distribution.